ContaminEX ® Decontamination Fluid has been developed for the Laboratory and Nuclear Decontamination Sector to remove surface contamination and remove radioactive isotope residue.
ContaminEX is a highly alkali surface decontamination solution that should not come into contact with polycarbonates or non-ferrous metals such as zinc or aluminium.
INSTRUCTIONS FOR USE
- Shake the bottle well before making solution
- Dilute using potable (Tap) water.
Top Tip: Using warm water (Up to 50oC) and/or an ultrasonic cleaning bath will speed up the cleaning time
20-30ml ContaminEX to 1 Litre Water for General Cleaning
40-100ml ContaminEX to 1 Litre Water for Persistent Contamination
Fully immerse and soak the items to be cleaned for up to 24 Hours depending on level of contamination ensuring no air bubbles. Agitate items & solution from time to time to reduce contact time and improve cleaning.
- Following Decontamination & Cleaning, remove from the solution and rinse thoroughly under flowing water ensuring all visible traces of ContaminEX are removed.
- Dry thoroughly use low lint cloths or allow to air dry or use air dryer.
In certain specialised or critical areas, demineralised water can be used.
|Contains amongst other ingredients|
|Also contains:-Potassium Hydroxide, Nitrilo acetic acid salts, Acetodiphosphonic acid.|
ContaminEX is an extremely economical surface treatment for decontaminating most hard surfaces and can save £’s over other proprietary brands.